Many user chillers will encounter this inevitable problem after using it for a long time. That's how to make maintenance work, you can continue to keep tidy, clean, not only the surface is simple, it is, in fact, the inside of the chiller is The hardest is easily cleaned, and it is easy to be missing.

1. The setting of various protection devices of the unit has been set by the manufacturer. If the user please do not change, if a fault is stopped, you should press the stop button (the prompt light will be extinguished), then check the cause, humidification machine Do not boot operation in troubleshooting.

2 To ensure a good heat dissipation, keep the surface of the chiller clean, ensure that the air is circulating around the machine, the temperature is low, and the hot coil is cleaned regularly.

3. If it is not an emergency, do not shut down the unit by cutting off the power;

4. If the chiller has been used for 6 months, the dehumidifier or high / low voltage switch often has failed, or the refrigeration capacity is reduced, and the staff should be arranged to clean the condenser. If this has been made many times, the short water machine goes the fault alert screw cold water unit maintenance and maintenance method Hand-drawn gourd daily inspection maintenance precautions to determine the method of low diesel oil pressure and how to remove the fault How to maintain how to maintain The heat transfer oil pump extends the life method of vacuum pump.

5, keep the machine room clean, well ventilated, regular cleaning the condenser to ensure the clean water tower clean, keep the air circulation and temperature around the water tower, avoiding debris into the cooling water tower to reduce heat dissipation efficiency.